Using the Label Peeler (Optional:PA-LP-001) (TD-2120N/2130N only)

j In order to remove any slack in the roll, lightly pull on the paper fed out of the liner exit until no more can be pulled out.

k Press the (Power) button to turn the printer on.

NOTE

If the paper size information for the die-cut labels being used has been registered with the printer, pressing the (Feed) button will position the label at the correct starting position. For details, see Registering Paper Size Information With the Printer on page 9.

When printing without using the peeling function

Receipt paper can be installed normally, and printing can be performed without using the peeling function, even if the label peeler is installed.

For details on loading paper, see Inserting the RD Roll on page 15.

NOTE

When inserting receipt paper, do not feed the paper through the liner exit.

Printer Driver Settings

a Display the printer’s [Printing Preferences] dialog box.

Windows® XP

Click [Start] - [Control Panel] -

[Printers and Other Hardware] -

[Printers and Faxes], right-click the printer whose settings are to be changed, and then click [Printing Preferences].

Windows Vista®

Click - [Control Panel] -

[Hardware and Sound] - [Printers], right-click the printer whose settings are to be changed, and then click [Printing Preferences].

Windows® 7

Click - [Devices and Printers], right-click the printer whose settings are to be changed, and then click [Printing Preferences].

Windows® 8

Click [Control Panel] in the [Apps] screen - [Hardware and Sound] - [Devices and Printers], right-click the printer whose settings are to be changed, and then click [Printing Preferences].

13

109