Printing |
|
Printing the Printer Setup Information |
|
You can use the (Print) button to print a report that lists the following printer settings: |
|
Program version | 2 |
Printer usage history |
Missing dot test pattern
List of transferred data
Communication settings
NOTE
•You can use [Device settings] of the “Printer Setting Tool” to set, in advance, which items will be printed. For details, see Printer Information Report on page 36.
•The node name will also appear in the communication settings. The default node name is “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is based on your printer’s MAC address/Ethernet address.)
a Make sure that a roll of 2.25" (57 mm) receipt paper has been loaded, and the RD Roll compartment top cover is closed.
b
c
Turn on the printer.
Hold down (for at least 1 second) the 
(Print) button until the POWER indicator starts blinking in green and the printer setup information is printed.
NOTE
•For printing the printer setup information, we recommend using 2.25" (57 mm) receipt paper. The length required for printing differs depending on the information to be printed.
•The printer setup information can also be printed from [Device settings] of the “Printer Setting Tool”. For details, see Print Information Report on page 41.
19 