4Serialize Mode

Select whether or not to serialize from the last number printed.

Available settings: [Cont From Last], [From Starting#]

5Save Printer Print Log

Select whether nor not to save the printer’s print log. If [Disable] is selected, [Tools] - [Save Print Log in File] cannot be performed. Available settings: [Enable], [Disable]

6Print Data after Printing

Select whether or not print data is erased automatically after it is printed.

Available settings: [Erase All Print Data], [Keep Print Data]

Sensor Adjustment Tab

If RD Rolls are being used, it is unnecessary to adjust the sensors.

1

2

3

4

1Disable these settings

When this check box is clicked, appears in the tab, and the settings can no longer be specified or changed.

In addition, the settings in a tab where appears will not be applied to the printer even if [Apply] is clicked. To apply the specified or changed settings to the printer, be sure to clear the check box.

Printer Setting Tool

2Media Sensor (Transmissive/Gap)

The following transmissive/gap sensor parameters can be adjusted. [Detection Sensitivity]

Adjust the precision of the sensor that detects the gaps (spacing) for die-cut labels. Available settings: -2–+2

[Luminescence Adjustment]

3

Adjust the amount of light emitted by the

transmissive/gap sensor. Available settings: -2–+2

3Media Sensor (Reflective/Bar)

The following reflective/black mark sensor parameters can be adjusted.

[Mark Detection Sensitivity]

Adjust the precision of the sensor that detects the black marks.

Available settings: -2–+2

[Luminescence Adjustment]

Adjust the amount of light emitted by the reflective/black mark sensor.

Available settings: -2–+2

4Media Sensor (Peeler) (TD-2120N/2130N only)

This appears only if TD-2120N/2130N is selected for [Printer]. Specify the settings when the label peeler (optional) is used.

Adjust the precision of the sensor that detects whether the label has been peeled.

Available settings: -2–+2

37