WELCOME TO EFFICIENT
CONGRATULATIONS! You have made an excellent choice and sound investment in home cooling comfort! Bryant offers more than one hundred years of creating customized home comfort systems with the broadest selection of residential heating and cooling products available.
Your new Bryant Heat Pump is a product of that experience, and will provide you and your family with years of dependable, energy efficient cooling comfort.
This booklet provides information on how your system works as well as helpful hints on operation and maintenance so you can enjoy peak performance for years to come. For even greater peace of mind, your expert Bryant dealer can provide professional maintenance and service on an annual or
A NOTE ABOUT SAFETY
Any time you see this symbol 
in manuals, instructions and on the unit, be aware of the potential for personal injury. There are three levels of precaution:
DANGER identifies the most serious hazards which will result in severe personal injury or death.
WARNING signifies hazards that could result in personal injury or death.
CAUTION is used to identify unsafe practices which would result in minor personal injury or product and property damage.
WARNING:
PERSONAL INJURY, DEATH AND / OR PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal injury, death or property damage.
Improper installation, adjustment, alteration, service, maintenance, or use can cause explosion, fire, electrical shock, or other conditions which may cause personal injury or property damage. Consult a qualified installer, service agency, or your distributor or branch for information or assistance. The qualified installer or service agency must use
WARNING:
PERSONAL INJURY, DEATH, OR PROPERTY DAMAGE HAZARD
Failure to follow this warning could result in personal injury, death, or property damage.
Read and follow all instructions and warnings, including labels shipped with or attached to unit before operating your new air conditioner.
ABOUT YOUR HEAT PUMP SYSTEM
Identifying Your System
Your new Bryant Heat Pump system is what we call a ”split system.” It has an outdoor unit and an indoor unit connected to each other with copper tubing called refrigerant lines. Each of these units has a rating plate with the model and serial numbers you will need to reference when calling an authorized Bryant dealer about your system.
Take a few moments now to locate those numbers and record them in the spaces provide on the cover of this booklet.
USING YOUR NEW BRYANT SYSTEM
Your Bryant Heat Pump system is controlled by a
SYSTEM OPERATION WITH BASIC THERMOSTAT
Most basic thermostats have three main controls:
SSystem or Mode Control: Typically offers the following
selections: Cool, Off, and Heat. Some thermostats also have Auto, which lets the system switch between heating and cooling as needed.
STemperature Control: A button, lever, or set of buttons that allows you to select the temperature inside your home.
SFan Control: Typically offers two options: Auto and On. ”Auto” provides slightly higher energy efficiency by circulating air only during cooling (or heating) operation. ”On” provides better air circulation, better dehumidification and better air cleaning by running the system’s blower continuously.
HEATING YOUR HOME
For heating operation, make sure the System or Mode control is set for Heating. Then, adjust the Temperature control to your desired setting. Finally, use the Fan control to select Automatic (turns on and off as heating is needed) or On (runs continuously).
Depending on your typical heating needs, your home comfort system may also include a supplementary heating source that will automatically turn on as needed. You may also select this heat source manually if desired.
COOLING YOUR HOME
For cooling operation, make sure the System or Mode control is set for Cooling. Then, adjust the Temperature control to your desired setting. Finally, use the Fan control to select Automatic (turns on and off as cooling is needed) or On (runs continuously).
2
