Bryant TZEMT400AB32MAA manual Establish Online Control of the Thermostat

Models: TZEMT400AB32MAA

1 11

Page 11

Schlage LiNK account must be active before continuing. See link.schlage.com for more information.

a.Plug the Ethernet and power cord back into the bridge.

b.Log into your account at www.schlagelink.com.

c.Click the Climate tab and follow the onscreen instructions.

Image 11

Contents

Thermostat Guide Wire colors Letters may vary Physical Installation and WiringIf your existing thermostat is battery powered Remove existing wall plate Identify your System Type from the list belowPrepare two mounting holes Mark two mounting holes using new wall plateInstall new wall plate Connects to Review the wiring chart informationThemostat Brand Wire Labels Attach the thermostat face to the wall plate Attach all wires securely to the new thermostatIf necessary, cut the internal jumper wire JP1 Turn power to heating and cooling system back onIf your Gas or Electric furnace system also has System Settings at ThermostatSet Time and Date If your System Type is19C Heat Pump Mechanical Settings 19B Electric Furnace Mechanical SettingsTest Heating Operation if your system has heating Perform System CheckoutTest Cooling Operation if your system has cooling Verify enrollment of the thermostat Enroll Thermostat into Schlage LiNKTM SystemPrepare the bridge for enrollment Enroll the thermostat into the bridgeEstablish Online Control of the Thermostat