2BSST TWO CHANNEL POWER AMPLIFIER
2Bsst SPECIFICATIONS:
Power Output: 100 watts per channel into 8 ohms
Input Impedance: 10K ohms single ended (unbalanced) 15K ohms double ended (balanced)
Sensitivity: | 2v setting | 2 Volts in = 100 Watts into 8 ohms - gain 23 dB | ||
| 1v setting | 1 Volt in = 100 Watts into 8 ohms - gain 29 dB | ||
Distortion: | THD+noise: | < 0.010% 20Hz to 20kHz at 100 watts into 8 ohms, | ||
| IMD: |
| < 0.010% 60Hz + 7KHz mixed 4:1 | |
Noise: | Measured with input shorted - | 20Hz to 20kHz. | ||
| >108dB below rated output (with 20Hz to 22KHz bandpass filter) | |||
Slew Rate: | >60 volts per microsecond |
| ||
Power Bandwidth: | <1 Hz to over 100 kHz |
| ||
Damping Factor: | Over 500 at 20 Hz, ref. 8 ohms |
| ||
Power consumption: | idle | 30va, maximum power 600va | ||
Heat load: | idle | 100 btu/hr., max power 288 btu/hr | ||
Dimensions: | Regular model: Front Panel: | 17.2” x 4” | ||
|
|
| Body: | 16.9” wide X 3.5” high X 15.1” deep |
|
|
|
| (depth includes front panel and protrusion of rear panel connectors) |
| PRO model: | Front Panel: | 19” x 3.5” (2 rack units) | |
|
|
| Body: | 16.9” wide X 3.5” high X 15.1” deep |
Weight: | approx. 28 lbs (12.7kg.) | (depth includes front panel and protrusion of rear panel connectors) | ||
| ||||
3
