23
Freestyle 60 User Guide ~ 5th Edition ~ 3rd September ’01 ~ 3946
Wall mounting
For the best operating conditions,
try to place the base unit away from
large metal objects and other
electrical appliances.
Drill 2 holes for the screws and insert
the wall-plugs provided (if required).
Drive the screws into the wall, leaving
about 4mm free on which to mount
the bracket and base unit.
Make sure that the power supply and
the telephone cables are connected
to the base unit, then fit the cables
into the channels on the bottom of the
base unit.
Attach the base unit by hooking it over
the screws protruding from the wall.
Your Freestyle 60 can be wall-mounted
by removing the desk bracket.
To remove, just squeeze the bracket in
with thumbs and lift off as shown.
Please refer to page 27, wall-mounting
template.
WALL
WALL PLUG
70 mm
1
2
3
4
Note
Before you wall-mount your
Freestyle 60, check that:
• the wall can support the weight of
the base unit and handset;
• you are not drilling into any hidden
wiring;
• the power supply cable will reach
from the mains power socket to your
wall mounting position;
• the position you choose leaves enough
space so that the base unit is clear
of any obstruction on the wall, such
as a shelf or cupboard. Room should
be left so that the handset can be
placed on charge without touching
any obstructions.