Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780
4Getting started
3.At the charger: Plug the charger power cord into the charger and the mains power wall socket. Place the handset on the base to charge for at least 24 hours. The red Charging light
comes on. While the handset is charging, the 
symbol scrolls in the display, when the handset is fully charged the
display shows the 
symbol.
Registering your handset to your BT Elements base
If you are registering the handset to another DECT GAP compatible base station that is not a BT Elements, please refer to the user guide for that base for registration instructions.
IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly between different makes/types of handset and base. There’s a possibility that certain services such as Caller Display will not work correctly. The extended range feature only applies when registered to a BT Elements base.
IMPORTANT
Before registration, make sure the handset batteries are fully charged and that you are close to the main base unit.
At the BT Elements base:
1.Press and hold 
until you hear a beep, then release it.
The base will now remain in registration mode for 90 seconds, during which time you will need to complete the following procedure.
At the BT Elements additional handset:
2.Press Menu to open the main menu.
3.Press 
or 
until Register is displayed, then press Menu .
4. Press | or | to highlight Reg Base and press Menu . |
5. Enter a base number (from 1 to 4) and press Menu .
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
