87
BT Equinox 1350 – Edition 4.1 – 27.09.05 – 6576
If you experience any problems, please call the Helpline on 0870 605 8047
5. At the base: press and hold until the base
beeps. The display shows
Registration
.
6. The handset screen will show the base ID number.
Press OK to confirm. The handset screen then shows
Handset Registered
.The handset reverts to standby
and is given the first available handset number. You can
now use the handset.
Register handset with an additional base
Ahandset registered with one base can then be registered
with up to three more bases, e.g. at work, at home, or at
arelative’s home.
1. Press MENU then scroll to
Registration
and press OK.
2.
Register Handset
is highlighted. Press OK.
3. Scroll or to select the base. Press OK.
4. Enter the selected base’s SYSTEM PIN (original setting
0000). Press OK.
5. At the base: press and hold until the base
beeps. The display shows
Registration
.
6. The handset screen shows the base ID number, press
OK.The handset reverts to standby and is given the first
available handset number. It is now registered to the new
base and ready for use.
I
n
t
e
r
c
o
m
N
a
m
e
s
I
n
t
e
r
c
o
m
N
a
m
e
s
Additional handsets and bases
Toregister a GAP compatible
handset to your BT Equinox base,
please refer to the instructions
supplied with the handset you are
trying to register. Please note that
you will not be able to access the
answering machine facilities using
aGAP compatible handset and
other features may be limited.
All the bases that a handset can be
linked to are indicated by an ✱.