G u i t a r A m p l i f i e r H E A D
The Rear Panel:
16 | 17 | 18 | 19 |
15.AC Line Cord (not shown): The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stat- ed on the rear panel. Do not attempt to defeat the safety ground connection.
16.Footswitch: Use this jack to connect the supplied
17.Line Out: Use this 1/4” jack to send a line level signal to a mixing board, external power amplifier or powered monitor, or to the input jack of an exter- nal signal processor.
18.Line In: Use this 1/4” jack to connect the output of an external effects proces- sor to the amplifier.
19.8 Ohm Speaker: Use this jack to connect the external cabinet to the amplifier by means of a heavy duty Class 2 wiring speaker cable terminated with 1/4” plugs. The total impedance rat- ing for the external speaker(s) must be 8 ohms.
WARNING: The speaker output of this unit can exceed 10 Watts and could be a shock injury. Connection to speakers should be performed by a skilled person in compliance with local building codes. Class 2 wiring is required for speaker cables. Use of external speakers outside the ratings stated at the speaker jack may result in a shock injury or damage to the unit.
5
