Step Configure theAirStation
The User name and password field will open. Enter “root” as the User name and leave the password field blank. Click OK to enter the configuration page.
From this screen,you can access the
Advanced configuration settings are available by clicking the advanced button.
For more information about configuring and operating your 54Mbps Wireless Bridge Base Station, refer to the User Manual on the AirNavigator CD or the
Buffalo Support Web Site: http://www.buffalotech.com/wireless/support
If at any time you wish to restore settings to factory defaults, press the red INIT button on the rear of the AirStation for several seconds until the red DIAG light illuminates.
Once configuration is complete, connect the AirStation to your Local Area Network for normal operation.
5