Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is known in the State of California to cause cancer, birth defects and other reproductive harm.

All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered areas.

Keep children, and other distractions at a distance while operating power tools.

Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power cord is damaged.

Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure the cord is rated for outdoor use.

Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major appliances increases your risk of electric shock.

Use common sense while operating this power tool.

Do not use this tool if you are:

Feeling tired or are under the influence of alcohol or drugs.

Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts. Overreaching or have improper footing. Handling the tool in this way could cause serious injury.

When using this power tool always:

•Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.

•Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.

•Check to be sure the power switch is in the “OFF” position before plugging the power tool into an electrical outlet.

Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in electric shock or serious injury.

•Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.

•Use the correct tool for the job. Using the correct tool is safer and faster.

•Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”, discontinue use, and have the tool replaced or repaired.

•Remove the power cord from the power source before storage, changing accessories, or moving the tool.

•Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.

•Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of the power tool, and reduce the risk of injury.

•Check to be sure all moving parts are free from binding and are properly aligned.

•Use only accessories that are recommended by the manufacturer for your tool model.

Safety glasses and ear protection must be worn during operation.

BG8DL 8 Inch Bench Grinder Assembly & Operating Instructions

5

 

Page 4 Page 6
Page 5
Image 5
Buffalo Tools operating instructions BG8DL 8 Inch Bench Grinder Assembly & Operating Instructions
Page 4 Page 6

BG8DL specifications

The Buffalo Tools BG8DL is a dual-wheel bench grinder designed for both performance and efficiency, making it an essential addition to any workshop or garage. Built to provide high torque and versatility, this grinder is particularly suitable for sharpening tools, grinding metal, and other grinding applications.

One of the standout features of the BG8DL is its powerful 1/2 HP motor. This robust motor ensures that the grinder runs smoothly and can handle tough materials without bogging down. With a speed of 3,600 RPM, users can achieve quick and precise grinding results, enhancing productivity in their work.

The dual-wheel design is another key characteristic of the BG8DL. It comes equipped with two different grinding wheels, typically a coarse grit wheel for heavy material removal and a finer grit wheel for honing and polishing. This versatility allows users to switch between tasks seamlessly and is ideal for a range of applications from maintenance work to crafting and DIY projects.

Safety is a priority with the Buffalo Tools BG8DL. It includes protective eye shields that provide essential eye protection from flying debris during grinding operations. Additionally, the sturdy base features rubber feet, reducing vibration and enhancing stability during use. This helps to improve control and precision, especially when working on intricate tasks.

The BG8DL is designed with ease of use in mind. The adjustable tool rests enable users to set their workpieces securely and at the optimal angle for grinding. This feature is particularly beneficial when sharpening tools like chisels and blades, ensuring consistent results.

Portability is another important aspect of the Buffalo Tools BG8DL. Weighing in at a manageable size, it's easy to transport, making it convenient for users who might need to move their grinder between different work areas.

In summary, the Buffalo Tools BG8DL dual-wheel bench grinder combines power, precision, and safety features that make it a reliable choice for both professionals and hobbyists alike. Its durable construction, performance-oriented motor, and user-friendly design provide everything needed to tackle various grinding tasks efficiently, ensuring that all your metalworking needs are met with ease. Whether you are sharpening tools or performing light grinding work, the BG8DL stands out as a dependable tool that enhances productivity and delivers high-quality results.
Top Page Image Contents