BG8SS 8 Inch Bench Grinder Assembly & Operating Instructions 4
Keep children, and other distractions at a d istance while operating power tools.
Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to
pull the plug from the outlet. Keep the cord away from materials and surfaces that could damage cords. The risk
of electric shock increases when the power cord is damaged.
Always use the appropriate exten sion cord, maki ng sure it is rated for use with power tools. Always be
sure the extension cords are in good condition, free of cuts or nicks in the insulation. If using the power tool in
an outside area with an extension cord, make sure the cord is rated for outdoor use.
Do not make contact with a grounded surface while u sing this po wer to o l. Contact with surfaces like pipes,
radiators or major appliances increases your risk of electric shock.
Use common se n se while operating this power tool.
Do not use this tool if you are:
Feeling tired or are under the influence of alcohol or drugs.
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this power tool always:
• Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
• Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
• Check to be sure the power switch is in the “OFF” position before plugging the power tool into an
electrical outlet.
Follow these steps to maintain safe working conditions and good work ing condition of power tools.
Improper care can result in electric shock or serious injury.
• Secure and support the work piece using clamps. Do not use your hands to hold the piec e in place.
• Use the correct tool for the job . Using the correct tool is safer and faster.
• Make sure the power switch is in good working order . If the power switch no lo nger turns the tool
“ON” or “OFF”, discontinue use, and have the tool replaced or repaired.
• Remove the power cord from the power s o u rce before storag e, changing a ccessories, or moving
the tool.
• Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
• Keep tools clean, and cutting tools sharp. Ma inta in ing tools with pr op er care will incr eas e the life of
the power tool, and reduce the risk of injury.
• Check to b e su re all moving parts ar e free from binding and are pr o p er ly aligned.
• Use only accessories that are recommended by the manufacturer for your tool model.
Safety g lasses and ear protection must be worn during operation.
SERVICE
Tool service m u st be performed only by qualified repair personnel. Ser vic e or mainten anc e b y unqua lif ied
personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts and follow instruc tions in the manual. Use of
unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.