IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THIS TOOL, YOU NEED TO BECOME FAMILIAR WITH ITS OPERATION. IF YOU ARE UNSURE ABOUT THE OPERATION OF THE TOOL, OR HAVE ANY QUESTIONS ABOUT ITS PROPER USE, CALL THE CUSTOMER SERVICE DEPARTMENT AT
Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
Be sure your work area is clean and secure before turning the power switch into the “ON” position. Be sure the area is free from all foreign material, nails, staples, or any other material.
Turn the drill “OFF” and unplug from the power source before making any changes or adjustments to the drill.
Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the drill. Never use gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the tool. Always use the appropriate safety gear when operating this drill. Including but not limited, to goggles, dust mask or respirator. Always work in a
Keep hands away from the cutting area. Do not reach under the work piece.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
THE FOLLOWING SYMBOLS MAY BE USED ON YOUR TOOL. BE FAMILIAR WITH AND LEARN THE SYMBOLS TO OPERATE THE TOOL SAFELY.
SYMBOL | NAME | DESCRIPTION |
V | VOLTS | VOLTAGE (POTENTIAL) |
A | AMPERES | CURRENT |
HZ | HERTZ | FREQUENCY (CYCLES PER SECOND) |
W | WATT | POWER |
KG | KILOGRAMS | WEIGHT |
| ALTERNATING CURRENT | TYPE OF CURRENT |
| DIRECT CURRENT | TYPE OF CURRENT |
| ALTERNATING OR DIRECT | TYPE OF CURRENT |
| CURRENT |
|
| EARTHING TERMINAL | GROUNDING TERMINAL |
|
|
|
| CLASS II CONSTRUCTION | DENOTES DOUBLE INSULATION |
MIN | MINUTES | TIME |
S | SECONDS | TIME |
| DIAMETER | SIZE OF DRILL BITS, GRINDING WHEELS, ETC. |
| NO LOAD SPEED | |
|
|
|
…/MIN | REVOLUTIONS PER MINUTE | REVOLUTIONS, SURFACE SPEED, STROKES, ETC. PER |
|
| MINUTE |
1,2,3… | RING SELECTOR SETTINGS | SPEED, TORQUE OR POSITION SETTINGS |
DP5UL 5 Speed Drill Press Assembly & Operating Instructions | 7 |
|
