Buffalo Tools IW12BX 12V instruction manual Operating Instructions, Cd B

OPERATING INSTRUCTIONS

WARNING! Gasoline engines create carbon monoxide, an odorless, colorless, tasteless gas that causes headaches, nausea, dizziness and even death if exposure is prolonged. The engine does not have to be running to use this impact wrench. If forced to run the engine, do so in a well-ventilated area.

NOTE: The motor in this wrench spins until it reaches maximum speed, then the internal clutch automatically engages and the nut is loosened or tightened. THIS IS NORMAL AND DOES NOT INDICATE A PROBLEM.

Prior to using this impact wrench, be sure your vehicle or wheel is secured. If wheel is still on the vehicle, make certain the vehicle is parked on firm, level ground, that it is in “Park” and that the Emergency Brake is engaged. Use wheel chocks on the other wheels if available or a large rock, large piece of wood – anything to prevent inadvertent movement of the vehicle.

This tool operates on 12V DC, such as that found in a standard automobile battery. Do not attempt to use this tool with any other voltage. Do not alter the power cord in any way. Doing so is both dangerous and voids the warranty.

A

Figure 1

E

Figure 2

CD B

F

G

Figure 3

As shown in Figure 1, you may connect this impact wrench directly into the 12V receptacle (A), the cigarette lighter in your vehicle, or you may use the Battery Adapter Cable (B) and use the vehicle battery itself.

To use the Battery Adapter Cable, simply insert the 12V plug-in (C) into the adapter. (Figure 2) Then connect the Red clamp (D) to the Red Positive terminal (F) of a 12V automobile battery. The Positive terminal is marked with a +.

Connect the Black clamp (E) to a clean, grounded part of the vehicle such as the engine block or frame member (G). (Figure 3)

Model IW12BX 12V 1/2" DC Electric Impact Wrench

5