SBCN Abrasive Blast Cabinet Vertical Assembl y & Operating Instructions
4
IMPORTANT SAFETY RULES
COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR.
Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause
accidents or injury.
Do not operate the abrasive blaster in explosive areas, such as in the presence of flammable
liquids, gases or dust. Tools create sparks which may ignite the dust or fumes.
Keep bystanders, children and visitors away while operating the abrasive blaster. Distractions can
cause you to lose control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and
safer at the rate for which it is designed.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
Always check to make sure that the power switch is turned off before connecting blaster to power
source. Tool may cause damage to property or person if plugged in while power switch is on.
Keep children, and other distractions at a distance while operating the Blast Cabinet.
Use common sense while operating this abrasive blast cab inet.
Do not use this tool if you are:
• Feeling tired or are under the influence of alcohol or drugs .
• Wearing loose clothing or jewelry. Keep long hair pulled bac k and away from moving parts.
• Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
• When using this blast cabinet, always:
• Wear the proper safety equipment, such as safety goggles, dus t masks, non-skid shoes, etc.
• Check that the power switch is in the “OFF” position bef ore plugging the unit into an electrical outlet.
Use the correct tool for the job. Using the correct tool is safer and faster.
Check to be sure all moving parts are free from binding and are properly aligned.
Use only accessories that are recommended by the manufac turer for your tool model.
Safety glasses and ear protection must be worn during operation.
If Gloves are punctured or if you feel air blowing in the Glove, replace them immediately. DO NOT use a
damaged or punctured glove.
Abrasive media will not be effective after much use. Replace abrasive media periodically.