bühler
Allied Front-End Loader
- 26 - P4094
A yearly inspection of the valve is recommended. However the maintenance
intervals on the valve depends on the surrounding environment or if valve spools
become stiff. Where temperatures fluctuate from one extreme to another or
exposed to high salt the intervals for maintenance should be increased to protect
from corrosion.
On non-cab tractors mounted with the joystick valve, slip back the boot and clean
away any debris. Spray a corrosion resistant lubricant and remount the boot.
Replace a torn or cracked boot.
WARNING Shut tractor down and relieve oil pressure in system by
moving the control valve spools in both directions before doing any maintenance.
Maintenance involves yearly removal of valve spool end caps and cleaning all
debris and corrosion. Spray area with a corrosive resistant lubricant and recap.
CAUTION Never use grease to lubricate valve components where
climate temperature drops below 0°C as this could cause spools to jam.