Attaching the Loader to Your Tractor
(Continued)
6.When the hook is lined up, dump or roll back the bucket to lower or raise the subframe upright to align with the mounting boot.
7.Continue to drive the tractor forward until the subframe uprights are seated in the boot.
8.Secure the subframe uprights with the bolts and washers. Torque to 500
IMPORTANT: When mounting for the first
time, the front hook bolts will have to be tightened after positioning the hook directly over the mounting boss (most rearward position).
9.Raise the loader and lock the support stand tubes into the up position.
NOTE: When mounting for the first time, raise the loader slowly and check to make sure that the hoses do not bind or become pinched in all positions. Work the loader and bucket up and down to work out all the air in the hydraulics. Check and refill the tractor’s hydraulic system.
15
