65 Series Rotary Tiller

SERVICING INTERVALS

The periods recommended below are based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication or oil changes.

8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours

1. Lubricate PTO driveline (7 locations).

ALERT: When using the safety chains supplied with the PTO shaft, the shield bearings must be kept lubricated.

80 hours or once a season:

2.Lubricate rotor driven end Bearing (1 location)

3.Lubricate rotor drive end bearing

(1 location).

4.Lubricate chain drive bearing

(1 location)

- use 3 squirts only

- push grease in gradually

23

Page 23
Image 23
Buhler 65 Series warranty Servicing Intervals, Hours or once a season