65 Series Rotary Tiller
ATTACHING/UNHOOKING – cont’d.
9.Attach the PTO driveline:
a.Check that the driveline telescopes easily and that the shield rotates freely.
CAUTION: Be sure that the driveline does not bottom out when going through its working angles.
b.Attach the driveline to the tractor by retracting the locking pin, slide the yoke over the shaft and push on the yoke until the lock pin clicks into position. Pull on the yoke to be sure it is locked in position.
c.Attach the anchor chain on the driveline shield to the frame.
10.Use the 3 point hitch to raise the machine.
11.Unpin the front frame stand. Raise and pin in its storage position.
12.Remove the blocks from under the Depth Gauge Shoes.
13.Reverse the above procedure when unhooking from the tractor.
14
