85” Snowblower
MANUAL CHUTE CONTROL
1.Remove spout clamp and install chute.
2.Mount handle brackets to snowblower & hitch.
3.Insert handle extension, placing a 1” flat washer on both sides of the front handle bracket; secure with 3/16 cotter pin.
4.Attach handle to handle extension.
5.Turn chute away from handle.
6.Attach end of cable with cable bolt.
7.Wrap cable clockwise around chute and attach cable to tab on chute with cable clamp.
8.Wrap cable around handle extension 5 complete turns. Then secure other cable bolt.
- 10 -
