Bunn ESJ Installation, Technical Specifications, Electrical Requirements, BUNN Espress, Esj

BUNN Espress ®

INSTALLATION

ES•J

TECHNICAL SPECIFICATIONS

Motor Power	0.5 HP
Power Consumption	5.0 amps
Motor Speed	1400 rpm
Grinding Capacity	22-31 pounds/hour
Bean Hopper Capacity	2.6 pounds
Ground Coffee Container Capacity	0.3 pounds
Weight (Empty)	28 pounds

ELECTRICAL REQUIREMENTS

This grinder has an attached cordset and requires 2-wire, grounded service rated 120 volts ac, 15 amp, single phase, 60 Hz.

INSTALLATION

1.Clear all foreign objects and shipping materials from the en- trance to the grind chamber and the hopper.

2.Place the hopper on top of the grinder. The indentation in the hopper neck must align with the screw on the grinder. Tighten the screw into the hopper.

3.Remove the two fillister head screws on the left side of the front of the grinder.

4.Securely fasten the enclosed tamper to the grinder so that it extends down past the bottom edge of the ground coffee container.

5.Check the voltage at the electrical outlet for the proper volt- age.

6.The grinder can now be filled with beans, plugged-in, and put into service.

4