Bunn G92T manual CLEANING Continued, Bunn, USE & CARE INSTRUCTIONS for BrewWISESM System

		USE & CARE INSTRUCTIONS for BrewWISESM System
BUNN	®
		(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)

CLEANING (Continued)

STEP 6	STEP 7	STEP 8
Pull out lid assembly.	Unscrew the inlet cap.	Clean inlet tube with the
		medium sized brush (BOM
		#00675.0000) and clean-
		ing product solution.

STEP 9	STEP 10
Rinse well. Reassemble	Make sure reservoir is
the lid making sure to re-	empty and unscrew the
place the retainer cap.	sight gauge cap.

STEP 11	STEP 12
Remove the glass tube.	Clean the sight gauge with
	the large brush (BOM
	#00674.0000) and reas-
	semble.

STEP 13

Reinstall glass tube and the sight gauge cap.

STEP 14 STEP 15

Thoroughly rinse entire Use a clean damp cloth inside of the server. DO rinsed in nonabrasive, NOT immerse server in mild detergent to clean all

water.surfaces.

STEP 16 STEP 17 STEP 18 STEP 19 STEP 20

Turn the faucet wing nut in a clockwise direction and remove the faucet from the dispenser. Un- screw the faucet cap from the faucet body and dis- assemble all faucet parts.

Transfer these parts to a three compartment sink for cleaning. Fill the first sink with a soap solution using a mild detergent, the second sink with a sani- tizer solution (75°F warm chlorine solution of at least 50-100 ppm) and the third sink is used for clean rinse.

Use a small brush (BOM #00674.0000) to thor- oughly scrub the faucet body.

Use a small brush (BOM #00674.0000) to thor- oughly scrub the faucet shank.

Allow the parts to soak in a sanitizer solution for a mini- mum of ten minutes. Re- move the faucet parts from the sanitizer solution and rinse thoroughly. Allow parts to air dry over night.

34481 011403