Page 17
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET NEW RECIPES - METHOD 1 (cont.)
8. Using (-) and (+), set the amount of brew water, in
ounces, to be dispensed over the grounds for that
particular batch size.
9. When finished, press another batch size and re-
peat step #8 for that size. Continue setting all batch
sizes.
10. When finished setting all batch sizes, press and
release DONE. The display should read BATCHES
DONE?
11. If the three batch sizes are not correct, press and
release NO to return to the BREW Ml setup screen
and repeat steps 8 through 10. If all batch sizes are
correct, press YES. This will advance to the %
DILUTION: function. (Refer to page 23 for de-
scription of % DILUTION: function.)
12. Using (-) and (+) set the amount of dilution water
(percentage) to be dispensed around the grounds
for that particular batch size.
13. When finished, press another batch size and re-
peat step #12 for each batch to be set.
14. When finished setting each batch size, press DONE.
The display should read BATCHES DONE?
15. If all batch sizes are not correct, press and release
NO to return to the DILUTE MI/M: setup screen and
repeat steps 12 through 15. If they are correct,
press YES. This will advance to SET PULSE BREW.
(Refer to page 24 for description of SET PULSE
BREW function.
DILUTE MI/M: XX.X
(-) DONE (+)
BATCHES DONE?
NO YES
SET PULSE BREW?
NO YES
SET BY EXAMPLE?
NO YES
16. To SET PULSE BREW, if setting pulse brew BY
EXAMPLE (brewing into a funnel) press YES and
proceed with the setup instructions for
SETTING
PULSE BREW - BY EXAMPLE,
on page 26.
17. If setting pulse brew by ENTER TIMES (entering
known times) press NO. The display should read
ENTER TIMES. Press and release YES and pro-
ceed with the setup instructions for
SETTING
PULSE BREW - ENTER TIMES,
page 27. After SET
PULSE BREW has been accomplished, the next
function will be SET PREINFUSION. (Refer to page
28 for description of SET PREINFUSION function.
ON TIME X:XX
(-) DONE (+)
OFF TIME X:XX
(-) DONE (+)
ON OFF
X:XX X:XX
DRIP TIME X:XX
(-) DONE (+)
BATCHES DONE?
NO YES
SET PREINFUSION?
NO YES
ADVANCES
TO NEXT
FUNCTION
5 SEC. DELAY
18. To SET PREINFUSION press YES in the SET
PREINFUSION screen to proceed. The display
should now read ON TIME and a batch light will be
blinking.
19. Using (-) and (+), set the amount of time the brew
water will initially presoak the grounds for that
particular batch size.
20. When finished, press another batch size and re-
peat until all batch sizes are set.
21. When finished, press DONE. The display should
now read OFF TIME and a batch light will be
blinking.
P3207
P3208
37467 110904