Bunn Single Brewer Dimensions & Specifications, Model Product # Volts Amps Total, Shipping, Cord

Dimensions & Specifications

Model		Product #	Volts	Amps	Total	Brewing	Cu.	Shipping	Funnel	Cord
					Watts	Capacity	Ft.	Weight	Locks	Attached
Titan Single	39300.0000	120/208	33.4	12000	22.5 gal/hr	17.4	110 lbs.	Yes	No
			(3-phase)
			*120/208	40.1	8200	17 gal/hr

(single-phase)

Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise).

Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual. *Brewer can easily be rewired in the field for single-phase operation.

Electrical: Brewer is 4-wires plus ground service rated 120/208V, 3-phase, 50/60Hz.

Plumbing: 20-90 psi (138-621 kPa). Machine supplied with 3⁄8" male flare fitting. Requires 4 gpm minimum water flow.

Bunn-O-Matic®Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches.

10/08 © Bunn-O-Matic Corporation