Installing Tailgate and Splashguard Nomad:
1. Loop tie -down straps over corners of side panels and
join male buckle sections on straps to female buckle
sections inside trailer. FIGURE 3 & PHOTO 8
2. To accommodate different sizes of ca rgo, tighten or
loosen the webbing straps as needed. PHOTO 8
Nomad:
1. Place cover over side p anels, with “Nomad” logo at trailer
front. FIGURE 3
2. Slip one roll ba r knob through a grommet on
cover. FIGURE 3
3. Slide roll ba r through casing in divider, and match roll bar
end with its corresponding hole on side rail.
4. Thread roll ba r knob through side rail, and tighten.
5. Repeat for knob o n other side.
6. Loop O-r ings on cover over trailer frame tube ends.
Make sure cover extends over top of side panels.
Installing Tow Bar 1. Slide tow ba r through both tow bar mounts on left side.
2. Match rear t ow bar hole with rear mount hole.
3. Inser t the retaining pin through both holes, and lock
retaining hoop securely. PHOTO 9 & PHOTO 10
6 BURLEY NOMAD AND FLATBED OWNER’S INSTRUCTION AND SAFETY MANUAL
PHOTO 8
FIGURE 3: NOMAD
O-Ring
Splashguard
Trailer Frame
Tailgate
PHOTO 9: NOMAD TOW B AR INSTALLATI ON
Trailer Front
Retaining Pi n
Tow Bar Mounts
Webbing Strap
Webbing Strap
Buckle
Trailer
Rear
Roll Bar
Roll Bar Knob
Cover Gromme t Side Rail