Attaching Wheels
1. Inser t wheel axle assembly completely into trailer
axle. FIGURE 3
2. Close quick rele ase lever, with lever aimed at trailer rear.
A properly adjusted quick release lever should leave an
imprint on your palm when the lever is rotated to the closed
position. FIGURE 4
3. Verify that tires a re inflated to pressure marked on tire
side wall.
4. To remove wheel from trailer a xle, open quick release lever.
Attaching Handle
1. On handle en ds, push button detents in and slide handle
into handle receivers by wheel axles, with handle extendi ng
out over trailer rear (narrow end). PHOTO 3
2. To remove handle, push butto ns on front of handle
receivers and pull up on handle.
Installing Tow Bar
1. Slide tow ba r through both tow bar mounts on left side.
2. Match rear t ow bar hole with rear mount hole.
3. Inser t the retaining pin through both holes, and lock
retaining hoop securely. PHOTO 4
Top View
PHOTO 3
FIGURE 3: Quick r elease le ver in unl ocked
“open” positi on
FIGURE 4: Quick re lease le ver in loc ked
“closed” posi tion
Top View
Trailer
Rear
Wheel
Axle
Button
Detent
Handle
Receiver
PHOTO 4
BURLEY TAIL WAGON OWNER’S INSTRUCTION AND SAFETY MANUAL 5

MAKE SURE WHEELS AR E HELD SE CURELY, WITH WH EEL AXLE

ASSEMB LY FULLY INSERTE D INTO TRAIL ER AXLE. YOU S HOULD

NOT BE ABLE TO ROCK OR S HIFT WH EELS. IMP ROPERLY IN-

STALLED WHE ELS CAN FALL O FF, CAUSING A N ACCIDE NT OR

SERIOU S INJURY.

WARNIN G
Front
Tow Bar
Mount
Retaining Hoo p
Rear Tow
Bar Mount

NEVER OP ERATE TRAILE R WITHOUT R ETAINING P IN LOCKED IN

PLACE. AN U NLOCKED T OW BAR CAN LOO SEN OR D ETACH,

CAUSIN G ACCIDE NT RESULTIN G IN SER IOUS INJ URY.

WARNIN G