Burley Kazoo, Piccolo instruction manual Trailercycle Assembly, Detent engaged in frame hole

1

Detent engaged in frame hole

Trailercycle Assembly:

1.Insert tow bar into frame coupling and align so that detent engages in detent hole on frame as shown above. Progressively tighten clamp bolts, alternating between bolts every 1-2 N·m until both bolts are at 6-8 N·m (4-6 ft-lb).

2.Mount pedals (stamped R for right and L for left) to the corresponding crank arm and tighten. Left pedal uses left hand threads (counter-clockwise to tighten).

3.Remove stem face plate, place handlebar into clamp and replace face plate. Center handlebar and tighten face plate bolts to 4-5 N·m (3-3.7 ft-lb).

4. Insert flag into flagholder (inside left dropout). 3.