OPERATION
BASICOPERATION
TURNON THE UNIT
CHANNELSEARCH
WATCHTVPROGRAM
CHANGEVOLUME
PIC
CHANGESOUND MODE
SOUND
VIEWCHANNEL INFORAMTION
MUTE
CHANGEINPUT SOURCE
SOURCE
Pressthe POWER button on the remote control to switch on the power. The power
indicatorwill light up in green colour, press the POWER button again to switch off
thepower, and the indicator will change to red.
Pressthe VOL - or VOL + button to adjust the volume level. Press the VOL - button
repeatedlyto decrease the volume; press the VOL + button repeatedly to increase
thevolume from 0 to 100.
Pressthe buttonrepeatedly to cycle through the available video picture modes.
Pressthe buttonrepeatedly to cycle through the available sound modes.
Pressthe INFO button to display the preset channel information.
Pressthe buttonthen press the buttons toselect the input source and
pressthe OK button to confirm.
Pressthe SOURCE button on the remote control to select the TV or DTV input mode,
andpress the OK button to confirm.If you are using the unit for the first time, an
InstallationGuide menu will be displayed to guide you through
Pressthe CH- or CH+ button to select the previous or next channels or press the 0-9
buttonsto enter a channel number directly.Press CH.LIST button to view the channels
listand press the buttons to select the desired TV programmes.
Pressthe buttonto cut off the sound output, press this button again to resume
soundoutput.
MUTE
thechannel scan.
Usethe remote control to finish channel scan (you can also refer to CHANNEL MENU
(page16) in this manual for the channel scan operation).
CHANGEPICTURE MODE
-13-
EXIT MENU
OK
NEWINSTALLATION
MenuLanguage English
AutoTuning