OPERATION
1.Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader equipped with a 48” bucket, external hydraulic system of 7 GPM with engine operating at 2500 RPM and relief setting of 2000 PSI.
Horsepower Range | ||
System pressure/flow rate | 2000 PSI/ 7 GPM | |
Lift Capacity to maximum height | 1253 lbs. | |
Breakout force at pivot pin | 3060 lbs. | |
Rollback force at ground line | 2470 lbs. | |
Total weight with bucket (approx.) | 770 lbs. | |
Raising time to full height | 4.4 seconds | |
Lower time | 2.9 seconds | |
Attachment dump time | 3.5 seconds | |
Attachment rollback time | 2.5 seconds | |
Hydraulic system flow | 7 GPM | |
System pressure at rated flow | 2000 PSI | |
(A) | Maximum Lift Height at Pivot Pin | 97” |
(B) | Maximum Height Under Bucket | 91” |
(C) | Clearance with Bucket Dumped | 75” |
(D) | Reach at Maximum Height | 27” |
(E) | Maximum Dump Angle | 46° |
(F) | Reach with Attachment on Ground | 65” |
(G) | Attachment Rollback Angle | 25° |
(H) | Digging Depth | 4” |
(I) | Overall Height in Carry Position | 51” @ kneeplate |
(Manufacturers estimated specifications and design subject to change without notice.)
1945 01/11 | Operation Section |
© 2011 Alamo Group Inc.
