Bush Hog 225 manual Hydraulic Control Valve Extra Equipment, Selector Valve Accessory Equipment

ASSEMBLY

Hydraulic Control Valve (Extra Equipment)

A three-spool, four way Hydraulic Control Valve, open center or closed center, is available as Accessory Equipment. This allows you to operate four Hydraulic Cylinders from two remote outlets. Connect the 3-spool Valve to one outlet to operate three Cylinders. Use the other remote outlet to operate the fourth Cylinder.

If Closed Center Valve is used, do not use the adjustable Relief Assembly. Use the No- Relief Assembly.

Selector Valve (Accessory Equipment)

The Mainframe Swing, Moldboard Pivot and Tilt are fully hydraulic. All three Cylinders can be operated from two remote outlets. Below is a schematic diagram showing proper routing of two Cylinders through the Selector Valve. When installing this Valve, observe all safety precautions as hydraulic lines are under high pressure (2500 PSI). If additional information is required concerning your hydraulic system, contact your Bush Hog dealer.

ASSEMBLY

225 Series 09/10 Assembly Section 3-5

© 2010 Alamo Group Inc.