(SL-32)
(SL-11)
(SL-15)

ASSEMBLY

Do not use an attachment that is not securely attached to the quick hitch, The attachment could fall resulting in severe crushing injuries or death to the operator or bystanders.

•Rotate both hitch pin levers down to the locked position. You should feel a firm resistance when locking the levers down. The pins must extend through the slots in the bottom of the attachment bracket.

•Examine the fit between the quick hitch and the bottom of the attachment bracket. The pins must extend through the slots in the bottom of the attachment bracket. The tapered side of each pin must be firmly wedged against the surface of the slot on the bottom of the attachment bracket. The attachment bucket should fit snugly against the bottom of the quick hitch bracket. If there is a gap of more than 1/8” or if the pins are not firmly seated do not use the attachment. Contact your dealer before using the attachment.

•On level ground, tilt the attachment down 90° degrees and lower it to the ground. Lower the loader further to slightly raise the front of the tractor off the ground. Drive the tractor in reverse while the attachment is on the ground for 20-30 feet to ensure the attachment does not disconnect. If the attachment disconnects during this process, discontinue the use of the attachment and contact your dealer.

NEVER walk or work under or allow any person to be underneath a raised loader or attachment.

Only mount the loader on a tractor that is listed on the mounting instructions. Never mount on a tricycle steering front axle. Move the tractor front and rear wheels to the widest spacing and add the recommended rear tractor ballast to prevent tractor tip over. Keep the tractor tires properly inflated. Maintain at least 25% of the total Tractor and Loader weight including the maximum load in the bucket or attachment on the rear axle. Always wear your seatbelt and make sure the ROPS structure is fully deployed to prevent serious injury or death from the tractor tipping over.

Make sure all air is purged from the hydraulic system before using the loader. Air in the system can cause the loader to respond sluggishly or with unexpected movement. The air can be purged from the cylinder lines by fully cycling the cylinders several times from the fully closed to fully open position. Sudden or unexpected movement or dropping of the loader and attachment could result in serious injury.

ASSEMBLY

5145 01/11

Assembly Section 3-3

© 2011 Alamo Group Inc.

Page 36 Page 38
Page 37
Image 37
Bush Hog manual 5145 01/11 Assembly Section
Page 36 Page 38

5145 specifications

The Bush Hog 5145 is a versatile and robust rotary cutter designed for heavy-duty use, perfect for maintaining large properties, farms, and fields. This model stands out in the Bush Hog lineup due to its excellent performance, durability, and user-friendly features, making it a popular choice among landowners and landscapers alike.

One of the standout features of the Bush Hog 5145 is its cutting width, which spans an impressive 15 feet. This allows for efficient coverage of large areas in a shorter amount of time, significantly boosting productivity. The cutter is equipped with high-strength steel blades that can easily manage thick brush, tall grass, and tough vegetation, ensuring clean and effective cutting.

The 5145 utilizes a heavy-duty construction, with a robust gearbox and substantial frame designed to withstand rigorous use in challenging environments. This ensures longevity and reliability, even when tackling the toughest vegetation. The heavy-duty drive system provides consistent power transfer, allowing users to tackle various terrains and conditions without compromising performance.

A key technological feature of the Bush Hog 5145 is its ability to be easily adaptable to different tractors, thanks to its adjustable hitch. This makes it compatible with a wide range of vehicles, enhancing its versatility. Additionally, the cutter features an innovative blade brake system that improves safety by quickly stopping the blades when needed, which is particularly useful when transitioning between mowing and transport modes.

The Bush Hog 5145 also emphasizes operator comfort and ease of use. Its ergonomic design allows for intuitive operation, reducing the learning curve for new users. The cutter's lightweight design, combined with its robust construction, enables easy maneuverability while maintaining stability during operation.

Another noteworthy characteristic of the 5145 is its maintenance-friendly design. The cutter is engineered for easy access to vital components, making routine maintenance and inspections straightforward. This contributes to reduced downtime, ensuring that the unit remains operational throughout the cutting season.

In summary, the Bush Hog 5145 rotary cutter blends power, efficiency, and user-centric design, making it a top choice for anyone in need of a reliable solution for large-scale land management. With its impressive cutting width, robust construction, and advanced safety features, it delivers the performance required to keep landscapes in pristine condition.
Top Page Image Contents