Bush Hog RDTH 84 manual Table Of Contents, Section/Para, Page, Rdth, Operator’s Manual

RDTH 84

Operator’s Manual

TABLE OF CONTENTS

SECTION/PARA PAGE SECTION/PARA PAGE

	Warranty		2
	Dealer Preparation Check List		3
	Safety Signs		4
	Safety Precautions		5
	Federal Laws and Regulations	6
I	INTRODUCTION AND DESCRIPTION		7
1-1 Introduction			7
1-2 Description			7
II	PREPARATION FOR USE		8
2-1 Attaching to Tractor			8
III	OPERATING INSTRUCTIONS		10
3-1 General Safety			10
3-2 Cutting Height Adjustment			10
3-3 Operation			10
3-4 Transporting			10

IV	MAINTENANCE		11
	4-1 Maintenance Check List		11
	4-2	Lubrication	11
	4-3	Belt Adjustment	12
	4-4	Belt Replacement	12
	4-5	Blade Replacement	12
	4-6 Troubleshooting		13
V	DEALER ASSEMBLY		14
	5-1 Base Unit Assembly		14
	Safety Decals		16
	Torque Specifications		17

RETAIL CUSTOMER’S RESPONSIBILITY

UNDER THE BUSH HOG WARRANTY

It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate, maintain and store the product in accordance with all instructions and safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this equipment.

It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety hazard.

It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog Dealer, from whom he purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submitted for warranty consideration must be made within forty-five (45) days of failure.

It is the Retail Customer’s responsibility for any cost incurred by the Dealer for travel- ing to or hauling of the product for the purpose of performing a warranty obligation or inspection.

1