Congratulations on your purchase of a Bushnell® ImageView® binocular. Before using the product, please read the instructions contained in this manual and take time to familiarize yourself with the different parts and features of the product.
CAMERA OPERATION INSTRUCTIONS |
|
|
BUTTON DESCRIPTIONS |
|
|
The MODE button has three functions: | Mode | Snap |
1.Power on: Press and hold the button until the camera turns on. When the camera is connected to a PC via the USB cable provided, the camera will power on automatically.
2.Power off: While the camera is on, press and hold the button until the camera turns off. If the camera has not been used or if a button has not been pressed for over 2 minutes, the camera will automatically power off to save battery life. If the camera is connected via USB, it will not power off except when the PC power is off.
3.Mode change: press the button rapidly to change modes. B. The SNAP button has two functions:
1.Take a picture: press this button to take a picture when the camera is on. (But not in the PC mode or mode change.)
2.Select: in “Mode Change” press this button to confirm the function.
2
