Bushnell 119425C instruction manual Bold=default Interval, Increments Settings start over at 60M

The SETUP Menu-Parameters and Settings List w/Descriptions

Parameter	Settings	Description
	(Bold=default)
Interval	10S (second)	Selects the length of time that the
	default,	camera will “wait” until it responds
	with a 60M	to any additional triggers from
	(minute) to1S	the PIR after an animal is first
	(second) range	detected and remains within the
	of settings	sensor’s range. During this user
	available.	set “ignore triggers” interval, the
		camera will not capture photos/
	(60M-1M are set	videos. This prevents the card
	in one minute	from filling up with too many
	increments,	redundant images. Settings
	59S-1S are set	begin with 10 second default
	in one second	when parameter is first selected.
	increments)	Note: after setting down past “1S”,
		settings start over at “60M”.
Sensor Level	Normal, High,	Selects the sensitivity of the PIR
	Low	sensor. The “High” setting will
		make the camera more sensitive
		to infrared (heat) and more
		easily triggered by motion, and
		the “Low” setting makes it less
		sensitive to heat and motion. The
		High setting can be useful when
		the ambient temperature is warm
		(making it more difficult for the
		sensor to detect animals), and
		the Low setting may help in cold
		weather if the camera is being
		triggered too often by anything
		warmer than the surroundings.

16