Bushnell 119438 instruction manual Video, Length only, Interval

Parameter	Settings	Description
	(Bold=default)
Video	10S (second)	Sets length per captured video
Length (only	default, with	clip. Settings begin with 10
affects video	60S to5S	second default when parameter is
clips)	possible range	first selected. After stepping down
		to 5S, video length settings start
		over at 60S.
Interval	10S (second)	Selects the length of time that the
	default,	camera will “wait” until it responds
	with a 60M	to any additional triggers from the
	(minute) to1S	PIR after an animal is first detected
		and remains within the sensor’s
	(second) range
		range. During this user set “ignore
	of settings
		triggers” interval, the camera will
	available.
		not capture photos/videos. This
	(60M-1M	prevents the card from filling up
		with too many redundant images.
	are set in	Settings begin with 10 second
	one minute	default when parameter is first
	increments,	selected. Note: after setting down
		past “1S”, settings start over at “60M”.
	59S-1S are set
	in one second
	increments)

21