Caution: This device can be used in extreme cold weather. However, when the unit is brought back into a warm environment, you must wait approximately 5 hours before using the unit again. Damage may occur due to condensation that may have accumulated on the internal circuitry of the unit.

Spots In The Image

You may see spots in the image. These vary from device to device and are cosmetic blemishes inside the device. These are normal for Night Vision devices and are NOT a defect.

TROUBLESHOOTING

Scope will not turn on.

Check that the batteries are installed properly. Replace the batteries with new ones. Check the battery contacts to ensure they are clean and free of corrosion. Check that the power is in the “ON” position.

Image is not focused.

Adjust the focus on the Eyepiece (4). Adjust the Objective Lens Focusing Ring. If still no improvement, clean the lenses; they may be foggy or dusty.

Visibility decreases or disappears.

Bright light sources such as headlights may cause visibility to degrade or disappear completely. Turn the Power OFF (2) and turn the scope away from the light source. The unit will restore itself in 1 or 2 minutes. Conditions such as fog or extremely dark environments will decrease visibility.

Scope flashes.

The scope may flash when used in a bright environment. It may also flash during the first few seconds of use in dark environments.

CARE AND MAINTENANCE

Your Bushnell Night Vision device was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your Night Vision device, always obey the following warning and precautions:

•Do not point this device toward any light source greater than 1 lux such as car headlights, for an extended period of time. This device utilizes an internal flash protection system which minimizes potential damage, but long-term exposure to bright lights can damage the unit. Any such damage may void your warranty.

•This device was designed to be self-contained. Do not open the body of the device or otherwise attempt to service this device.

•Always store the device in a dry, well-ventilated room.

•Remove the batteries if the device is to be stored for longer than 2 months.

•Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.

•Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device

incorporates a sophisticated optica system, which could be damaged in extreme cases of misuse.

•Clean the optical lenses with professional lens cleaning supplies.

•Clean the exterior of the device with a soft clean cloth.

Class 1 LED product per IEC 60825-1/nov 1993, appendix EN 60825-1A11/oct1996

6

7

Page 4 Page 6
Page 5
Image 5
Bushnell 26-0100 Scope will not turn on, Image is not focused, Visibility decreases or disappears, Scope flashes
Page 4 Page 6

26-0100 specifications

Bushnell has established itself as a reputable brand in the optical equipment space, offering a variety of products designed for outdoor enthusiasts, hunters, and sports fans. Among its notable offerings are the Bushnell models 26-0200, 26-0100W, 26-0102, and 26-0100. Each of these products showcases innovative features, advanced technologies, and reliable performance.

The Bushnell 26-0200 is recognized for its exceptional optical clarity, equipped with fully multi-coated lenses that maximize light transmission. This design ensures a bright and clear image even in low-light conditions, making it ideal for early morning or late evening activities. Additionally, the model boasts a rugged construction that withstands the rigors of outdoor use and is often waterproof and fog proof, providing durability in various environmental conditions.

Moving on to the Bushnell 26-0100W, this model introduces a wider field of view, essential for spotting game in dense environments. The product features Bushnell's BAK-4 prism system, which enhances light gathering and image sharpness. The ergonomic design allows for comfortable handling, while the textured surface ensures a secure grip, facilitating ease of use during long hours outdoors.

The Bushnell 26-0102 presents another impressive option with its advanced digital technology. This model includes features such as rangefinding capabilities, allowing users to accurately determine distances to objects – an invaluable tool for hunters and nature observers alike. The 26-0102 also offers various reticle options and digital enhancements that make it versatile for differing lighting conditions.

Lastly, the Bushnell 26-0100 incorporates a compact design, combining portability with performance. Its lightweight construction makes it convenient for users on the go. This model also incorporates a powerful magnification capability, providing users with an expansive visual range. Its robust build ensures that it can endure the toughest outdoor settings without compromising performance.

Overall, each of these Bushnell models – 26-0200, 26-0100W, 26-0102, and 26-0100 – embodies a blend of cutting-edge optics technology and practical design. Whether you're a dedicated hunter, an avid bird watcher, or a casual observer of nature, Bushnell's offerings are tailored to enhance your outdoor experience, ensuring you never miss the action while enjoying the great outdoors.
Top Page Image Contents