Bushnell 26-0224W instruction manual Spots In The Image, Troubleshooting, Scope will not turn on

Models: 26-0224W

1 48
Download 48 pages 16.73 Kb
Page 7
Image 7

Do not store this device while the indicator is lit.

This device can be mounted on any tripod with a ¼” tripod socket.

Caution: This device can be used in extreme cold weather. However, when the unit is brought back into a warm environment, you must wait approximately 5 hours before using the unit again. Damage may occur due to condensation that may have accumulated on the internal circuitry of the unit.

Spots In The Image

You may see spots in the image. These vary from device to device and are cosmetic blemishes inside the device. These are normal for Night Vision devices and are NOT a defect.

TROUBLESHOOTING

Scope will not turn on.

Check that the batteries are installed properly. Replace the batteries with new ones. Check the battery contacts to ensure it is clean and free of corrosion. Check that the power is in the “ON” position.

Image is not focused.

Adjust the focus on the Eyepiece (5). Adjust the Objective Lens (1). If still no improvement, clean the lenses; they may be foggy or dusty.

7

Page 7
Image 7
Bushnell 26-0224W instruction manual Spots In The Image, Troubleshooting, Scope will not turn on, Image is not focused