HOW TO BORE SIGHT A SCOPE-MOUNTED RIFLE OR HANDGUN
Scope/Rifle Combination
Once you have secured the Boresighter, place the rifle on a suitable support. Remove the adjustment caps from your riflescope. Then sight through the riflescope and align the reticle with the crosshairs of the graduated grid reticle in the Boresighter by using the riflescope’s elevation and windage adjustments. Once you have aligned the riflescope reticle with the graduated grid reticle in the Boresighter, you are ready for
Scope/Handgun Combination
Once you have secured the Boresighter to the barrel, place the handgun on a suitable support. Remove the adjustment caps from the scope. Sight through the scope and align the crosshairs with the crosshairs in the Boresighter using the scope’s elevation and windage adjustments. Once you have aligned the scope crosshairs with those of the Boresighter, your handgun is ready for
How to Bore Sight a Rifle or Handgun with Iron Sights
Once you have secured the Boresighter to the barrel, place the handgun or rifle on a suitable support. Viewing through the rear sight, adjust the sights to align with the crosshairs on the graduated grid reticle in the Boresighter. When you have completed bore sighting, the handgun or rifle is ready for
How to Make Corrections for Bullet Drop
Using the scope adjustments, you can make correction for bullet drop at a specific distance provided the trajectory of the specific load is known. Each graduation on the Boresighter grid is equivalent to 4 inches at 100 yards. When the scope reticle is below the grid center, the gun will shoot high.
Model #: 743333
Lit #:
Pro Boresighter Kit 743333-1LIM.indd 4
4/28/2008 2:56:54 PM
