Manuals / Bushnell / Lawn and Garden / Telescope

Bushnell 78-9470 manual depicting a fully-attached unit, Aligning and Using Red Dot Finderscope

Models: 78-9470

1 9

Download 9 pages 49.54 Kb

Page 5

Image 5

Please find below an image depicting how to attach the red dot finderscope and an image

depicting a fully-attached unit.

How-To-Attach: Place Finderscope Cylindrical Groove over Cylindrical Finderscope Mount Post

until it clicks into place.

Plastic Insert

Adjustment

Wheels

Aligning and Using Red Dot Finderscope

Remove plastic insert on bottom side of finderscope to allow battery to make connection with

battery contact for power. Turn power switch on.

Look through main telescope tube at low power and establish a well-defined stationary target. Looking through red dot finderscope, alternate tightening each adjustment wheel (at rear and left side of finderscope) until the red dot of finderscope is precisely aligned and centered on the same object being viewed in main telescope tube.

Page 5

Image 5

Bushnell 78-9470 manual depicting a fully-attached unit, until it clicks into place Plastic Insert Adjustment Wheels

Contents

Model 470 x 60 Zoom Refractor Telescope2. Set-Up Tripod TELESCOPE ASSEMBLY3. Attach Telescope and Finderscope STANDARD EQUIPMENT5. Attach Eyepiece Accessories 4. Attach Accessory TrayUsing the Penta Mirror Assembly Using the ZOOM Eyepiece AssemblySelecting an Eyepiece Focusing TelescopeAligning Finderscope Never Look Directly At The Sun With Your TelescopeAligning and Using Red Dot Finderscope until it clicks into place Plastic Insert Adjustment Wheelsbattery contact for power. Turn power switch on depicting a fully-attached unitHelpful Hints Enjoying Your New TelescopeWhere do I start? ANSWERS TO COMMONLY ASKED QUESTIONS TROUBLESHOOTING GUIDEIntended Configuration Diagram