Bushnell 78-9470 manual Attach Accessory Tray, Attach Eyepiece Accessories

Upside-Down Image Upside-Down & Reversed Ima

Reversed Image

Fully Correct Image

4.Attach Accessory Tray

Locate the Accessory Tray (8). Using the accessory tray bolts, wingnuts and washers connect the Accessory Tray to the Accessory Tray Braces (7). Start with one tripod leg and attach wingnuts. Wingnuts should be positioned beneath the accessory tray. Do not tighten wingnuts until all Accessory Tray Braces are attached as some adjustments may be required.

5.Attach Eyepiece Accessories

Attach accessories as suggested in Intended Use Diagram. For example insert penta mirror assembly into focusing tube, then insert desired eyepiece into penta mirror assembly.

6.Remove Lens Cover from 60mm Objective Lens

Your Bushnell Voyager Telescope is now ready to be used. To obtain the fullest enjoyment from your telescope, please refer to the additional information below.

HOW TO USE YOUR NEW TELESCOPE

Using the Penta Mirror Assembly:

1. A Basic Description: Bushnell is proud to present the

Exclusive Penta Mirror Technology. This Penta Mirror Assembly provides the benefit of a convenient 90 degree

viewing angle commonly associated with diagonal

mirrors. However, the Penta Mirror provides something that diagonal mirrors cannot provide--right to left correct views of the any object viewed through the telescope.

Unlike traditional diagonal mirrors that provide backward images of objects seen on land and in the night sky, the

Penta Mirror allows correct images to be viewed. The groundbreaking benefit of this technology is that when viewing and locating objects through the telescope, when you want to move to the left, you move it to the left intuitively instead of fumbling around the sky becoming

increasingly frustrated that you can’t move the telescope the way your intuition tells you that you need to move it.

Objects on land at great distances can be seen naturally (and readable) as if you were many times closer to the object. Objects in the sky appear as they appear in most star charts. For the first time ever, you will be able to see what you would expect resulting in excellent viewing satisfaction. In addition, the penta mirror has a special insert that is easily removed by backing out the eyepiece set screw and removing the insert to yield a 1.25” optical format receiver.

2. How-To-Use:Just like any traditional diagonal mirror, place the eyepieces directly into the rear of the Penta Mirror Assembly then place the Penta Mirror directly into the back of the telescope focusing tube, erecting lens or Barlow lens (See Intended Configuration Diagram).

Power Change Ring Insert

Zoom Eyepiece Penta Mirror

Using the ZOOM Eyepiece Assembly: