C. Crane TCAR, Twin Coil Ferrite Getting Star ted

The first time you use the Twin Coil Ferrite AM Antenna by C.Crane

it takes time, planning, and a little bit of patience. You will need to

re-check and re-tune the unit to find the best position. After you have

found the best spot for the TUNER CONTROL, FERRITE STICK,

and ANTENNA ELEMENT, you can take the time to secure and

make permanent the installation to your liking. The FERRITE STICK

can be fixed to the radio using the included hook and loop fastener.

If you have a problem finding a location for the ANTENNA

ELEMENT that produces good results, be sure to try different areas

within 50' of your radio. If you find a good position, you have the

option of locating the ANTENNA ELEMENT there. If you need to

mount the ELEMENT away from the radio for best reception, you

may order additional cable in 25' or 50' lengths. Please refer to the

inside cover of this manual for optional accessories.

To use the Twin Coil Ferrite AM Antenna with a radio that does not

have antenna connectors:

1. Find the patchcord with the

1/8" x RCA male connector.

2. Insert the RCA plug into the

FERRITE STICK.

3. Insert the other end of the

patchcord into the jack

labeled To Radio on the

TUNER CONTROL. (See

photo on page 5.)

Page 6 Twin Coil Ferrite

™

AM Antenna by C. Crane

Getting Star ted

Using the Twin Coil Ferrite

™

AM Antenna by C.Crane

RCA

ConnectorFerrite

Stick