Cabela's 18868 manual Installation, Sequential Multi-Stage Charging Overview

Models: 18868

1 11
Download 11 pages 63.36 Kb
Page 10
Image 10

I n s t a l l a t i o n G u i d e l i n e s

9

Installation (Continued)

7. Run your cables free from sharp objects and hold each of them in place with cable ties. Coil excess cable, do not cut or shorten the length of the cables, as there are in-line fuses located 4 inches from the end of each red (positive) cable. In addition, there are fuses in all but one of the yellow (negative) leads. These fuses are in place to protect the charger and output cables in the event of a short or reverse polarity.

8. Connect the DC output cables as illustrated on page 10. Make sure the (yellow) wires are connected as illustrated to the negative side of the battery and the red wires are connected to the positive side of the battery.

9. Make sure all DC connections are correct, tight, and free from corrosion.

10. Locate the AC power cord in an open-air area of your boat at least 21 inches from the charger, batteries, and fuel fill lines.

11. Connect a heavy duty UL approved extension cord to the ProSport Charger first. After connecting the extension cord to the charger, proceed to plug the extension cord to a nearby 120VAC GFCI protected (Ground Fault Circuit Interrupt) outlet.

Always remove the extension cord from the 120VAC outlet first when charging is completed, followed by unplugging the charger.

You are now connected and charging your batteries. View the LED indicators.

Assuming your batteries are discharged you should observe: Blue AC POWER LED is turned on, followed by the Red Charge LED and RED Battery Type LED turning on (red is the factory setting of flooded (Lead-acid)/AGM type batteries .

ProSport DC Output Cable Wiring Diagrams-Typical Installations

Note:ProSportWaterproofOn-BoardMarineBatteryChargersaredesignedforanycombination of Group 24,27,30 and 31 batteries. Each Battery Charger DC output cable must be connected to one (1) 12 Volt DC battery (even if batteries are configured for 24 Volt DC or 36 Volt DC trolling Motor or System Applications). See typical wiring diagrams for these systems on page 10.

ProSport Dual Bank Models can charge (2) independent or parallel 12 Volt DC Batteries or a 24 Volt DC Bank Configuration of: (two 12 Volt DC batteries in series) and our ProSport Triple Bank Model can charge (3) Independent or parallel 12 Volt DC batteries or a 36 Volt DC configuration of: (three 12 Volt DC batteries in series). Please see our typical wiring diagrams for 24 Volt DC and 36 Volt DC bank configurations and more. Simply attach each battery charger DC output cable to one 12 Volt battery. Because each output is isolated, all parallel or series jumper wires can remain connected to your batteries. Specifically you do not have to remove series or parallel jumper cables to use your ProSport Charger.

Note: If your application is for 4D or 8D large capacity batteries, please refer to ProMariner's website www.promariner.com and view our ProTech-i and ProNautic C3 Line of Dry Compartment Chargers. Using our online selector guide choose a model that best fits your application for this class of batteries.

P r o S p o r t O v e r v i e w

6

Sequential Multi-Stage Charging Overview

Upon applying AC power to your ProSport On-Board Marine Battery Charger, the following will be observed:

The Blue AC Power LED will illuminate followed by the Red Charging LED and Red Battery Type LED (Factory setting for Flooded (Lead-acid)/AGM batteries). The combination of these three LED’s turning on indicates ProSport has started its Sequential Multi-Stage Charging process. When the Charge Process is completed, only the Green READY and Blue AC Power LEDs will be illuminated.

ProSport’s Sequential Multi-Stage Charging process delivers three sequenced modes of operation that include: Charging, Conditioning and Maintenance of each battery. This process is proven to extend the life of your batteries and will fully charge your batteries each time.

Stage 1: ProSport Charging

During this mode, the ProSport will use its available charging amps (as controlled by temperature) until battery voltage is raised to 14.6 VDC (Factory setting for Flooded (Lead-acid) / AGM batteries).

Stage 2: ProSport Conditioning

The ProSport will hold batteries at 14.6 VDC (Factory setting for Flooded (Lead-acid) / AGM batteries) providing a 100% charge to each battery, while conditioning batteries by desulfating each battery. Upon completion, the ProSport will go to into its maintenance mode.

Stage 3: ProSport Ready / Maintenance Mode

During this mode, the Red Charging LED and the RED Battery Type LED (Factory set charge profile for Flooded (Lead-acid / AGM Batteries) will turn off indicating the Charge Process is completed, followed by the Green READY LED turning On.

The Green READY LED and the Blue AC POWER LED will remain on indicating that your batteries are fully charged and are being maintained with a precision 13.4 Volts DC Finishing Voltage (Factory set charge profile for Flooded (Lead-acid / AGM Batteries). ProSport’s Ready/Maintenance Mode is perfect for short or long term storage and will never overcharge your batteries.

Note: Only the Green READY LED and the Blue AC POWER LED will remain on when the ProSport is in its Ready/Maintenance Mode.

Average Voltage

 

 

 

 

14.6V

 

14

 

 

 

DC

 

 

 

13.4V

13

 

 

 

Volts

 

 

 

12

 

 

 

 

 

 

 

 

11

Charging

Conditioning

Maintenance / Float Mode

 

 

 

 

Performance Tip: For long term or winter storage/ maintenance of batteries, ProMariner

recommends that every 30 days: AC power is removed by unplugging your extension cord at the GFCI outlet first, check battery electrolyte levels. Re-apply AC power to your ProSport Charger. This practice will properly maintain your batteries resulting in extended battery life and use.

Page 10
Image 10
Cabela's 18868 manual Installation, Sequential Multi-Stage Charging Overview

18868 specifications

Cabela's 18868 is a standout product in the outdoor and sporting goods market, designed to enhance the experience of enthusiasts who enjoy hunting, fishing, and camping. With its focus on quality, durability, and functionality, this particular model has garnered a loyal following among outdoor enthusiasts.

One of the main features of the Cabela's 18868 is its robust construction. Made from high-quality materials, it is built to withstand the rigors of the outdoors, ensuring longevity even after frequent use. The rugged exterior not only contributes to its durability but also keeps it resistant to water and harsh weather conditions, making it an ideal companion for various outdoor activities.

Another notable characteristic of the 18868 is its spacious interior. Designed with multiple compartments, it offers ample storage space for gear, accessories, and supplies. Whether you are out for a day trip or embarking on a longer adventure, the thoughtfully organized pockets help keep everything in place, allowing for easy access to essentials.

In terms of technology, Cabela's has integrated cutting-edge features into the 18868 to enhance user experience. For instance, the product is designed with ergonomic handles that provide a secure grip, reducing hand fatigue during extended use. Additionally, the inclusion of advanced zippers ensures that the main compartments remain secure while allowing for effortless opening and closing.

The 18868 also incorporates features that promote versatility. Detachable straps and customizable components make it adaptable for different activities, whether you’re fishing by the river or hiking through the woods. This multifaceted approach makes it suitable for a wide range of outdoor scenarios, catering to varying needs and preferences.

Comfort is another key aspect of the Cabela's 18868. The padded back and adjustable straps provide optimal support, making it comfortable to carry, even over long distances. This thoughtful design acknowledges the importance of comfort during outdoor adventures, ensuring that users can focus on their activities without discomfort.

Overall, Cabela's 18868 is a prime example of innovation in outdoor gear. Its combination of durability, thoughtful organization, ergonomic design, and versatility make it an essential item for anyone who enjoys the great outdoors. Whether you're a seasoned explorer or just starting your outdoor journey, the 18868 is designed to meet your needs and exceed your expectations.