44 lb (20 kg) /110 lb (50 kg)
Stainless Steel
FLAT TOP SCALE
44 lb. MODEL
110 lb. MODEL
Wing Nuts 6 | Stainless Steel |
| Platform |
Tare
Dial
Pointer
Plastic
Face Plate
Dial
44 lb. Model Shown
TO CLEAN THE SCALE
Thoroughly wipe clean with a soft damp cloth and mild detergent. Wipe with clear water and dry immediately.
DO NOT IMMERSE THE SCALE IN WATER OR LIQUIDS.
REV122710
ASSEMBLY
INSTRUCTIONS
Before using the Flat Top Scale for the first time, attach the Platform onto the top of the Scale.
1.Begin by removing the cardboard support from the top of the Scale.
2.Attach the Platform to the top of the Scale with the included Wing Nuts.
3.DO NOT
ZERO THE SCALE
After attaching the Platform to the top of the Scale, the Pointer may not indicate “0” weight. Set the Pointer to the “0” position for the Scale to accurately indicate an object’s weight.
To zero the Scale, rotate the Tare Dial either clockwise or
the Pointer is off) until the Pointer indicates “0” weight.
The Platform is to be empty while zeroing the Scale.
To ensure accurate weight, make sure the Pointer is set to “0” before weighing an object.
To weigh objects in a container, place an empty container on the Platform then rotate the Tare Dial to zero the Scale. The Scale will now only indicate the weight of objects added to the container.
Before beginning the assembly, check the package contents for all of the parts.
If you are missing any parts, or if any parts are damaged, contact
Cabela’s Customer Service- Retail Store Purchases
Catalog & Internet Purchases:
