GENERAL INFORMATION
Both models are low noise, low distortion unity gain distribution amplfiers for line level stereo audio and video baseband signals.
Both models distribute a true one to one signal ratio. There is no loss of signal from original source to any output.
KEY INFORMATION
The AV400 and 700 units can be looped, cascaded or put in tandem as shown below without loss of audio/video signals. Audio/Video cables need to be top quality and can have runs of up to 100 feet between units and 150 feet between units and TVs.
The model AV400 distributes audio/video to four TVs without loss. The AV700 distributes audio/video to seven TVs.
A BC
A. 15 Volt DC input jack and power indicator. LED lights up when power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks. Connections are color coded (red to red, yellow to yellow and white to white).
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc. Connections are color coded.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense
heat. Avoid Electrical Shock: Do not handle power cord with wet hands; do not expose to rain or other moisture. If liquid is spilled on unit, unplug and have unit serviced at authorized service center. To reduce the risk of electrical shock, do not remove cover. No user serviceable parts inside.
Common Audio/video Sources: VCR, CD, Satellite receiver, etc.
Audio/Video Source
HIGH PERFORMANCE |
AUDIO AND VIDEO |
DISTRIBUTION AMPLIFIER |
Four Output |
True One To One Ratio |
CABLE ELECTRONICS, INC. |
Model 400 |
HIGH PERFORMANCE |
AUDIO AND VIDEO |
DISTRIBUTION AMPLIFIER |
Four Output |
True One To One Ratio |
CABLE ELECTRONICS, INC. |
Model 400 |
HIGH PERFORMANCE
AUDIO AND VIDEO
DISTRIBUTION AMPLIFIER
Four Output
True One To One Ratio
CABLE ELECTRONICS, INC.
Model 400
VIDEO
Gain:
1 Volt, Unterminated 2 Volt
Input Impedance:
75 Ohms +5%
Video Response:
50 Hz to 10 MHz <.4dB
Ch. to Ch. Isolation:
50 Hz to 10 Mhz 32 dB
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
AUDIO
Gain:
Unity
Input Impedance:
22 K Ohm
Output Impedance:
100 Ohm
THD:
0.05% at 1.0 Volts input level
Frequency Response: 10 to 50 KHz + 1 dB
Channel Separation:
> 75 dB @ 1 KHz
Out to In Isolation: 60 dB
Signal to Noise:
100 dB (re: 2 Volts out)
