2-26 SmartSwitch 6500 User Guide
SmartSwitch ATM Administrator Switch Installation and Setup
Figure 2-11 SmartSwitch ATM Administrator
SmartSwitch ATM Administrator can be installed on a workstati on runnin g W i ndows 95/98, Windows NT, or Solaris
2.4/2.5.
For Windows 95/98 or Windows NT, the following minimum hardware configuration is required:
•Pentium 133 Mhz or faster processor
•CD-ROM drive
•20 MB free disk space
•64 MB RAM
•Monitor with resolution of at least 800 x 600 pixels
•Ethernet or ATM network interface card
For Solaris 2.4/2.5, the following hardware configuration is required:
•Ultra-1 Sparc workstation or equivalent
•CD-ROM drive
•100 MB free disk space
•64 MB RAM
•200 MB virtual memory (swap space)