Cabletron Systems 7C03 MMAC manual Installing the 7C03 Mmac Smartswitch

Installation

2.2 INSTALLING THE 7C03 MMAC SMARTSWITCH

Prior to installing the 7C03 MMAC SmartSwitch, please read the note that appears on page 2-1.

To install the 7C03 MMAC SmartSwitch in an MMAC-M5FNB or MMAC-M8FNB chassis, use the following steps and refer to Figure 2-1.

1.Remove the blank panels covering the slots in which the 7C03 MMAC SmartSwitch will be installed. All other unused slots must remain covered to ensure proper air flow and cooling.

2.Hold the 7C03 MMAC SmartSwitch by the top and bottom handles and align the plastic rails on the top and bottom of the 7C03 MMAC SmartSwitch with the corresponding card guides on the MMAC chassis.

3.Slide the 7C03 MMAC SmartSwitch straight into the chassis until the 7C03 engages the backplane connectors.

4.Tighten the top and bottom thumb screws on the 7C03 MMAC SmartSwitch.

5.You can now install the 7X00 Module and SmartSwitch interface modules into the 7C03 MMAC SmartSwitch. Refer to the applicable module user’s guide for detailed installation instructions.

2-2