QUICKSPECS
Compaq NC3133
Fast Ethernet Module
100 FX
..........................................................
..........................................................................................................................................................
EASE OF USE
Plug and Play
Fully compliant with the 2.1 PCI specification, this NIC automatically configures its I/O address and interrupt (IRQ) settings for easy installation.
CPQNTAC
The CPQNTAC (Compaq Network Teaming and Configuration) utility allows the user to run initial diagnostics and configure NIC teams for NFT, ALB or Cisco Fast EtherChannel (when used with a Fast
Compaq Total Solutions
The NC3133 provides a 100Mbps
Warranty1
Compaq supports this product with a limited lifetime warranty1. Technical support is available at your fingertips 24 hours a day, 7 days a week.
SPECIFICATIONS
Compliance | IEEE 802.3z compliant 1000 Mbps Ethernet specification |
| PCI 2.1 |
General Specifications |
|
Communications Processor | Intel 82558 |
| Full and half |
6KB | |
Data path | |
Interrupt levels | INTC |
Bus architecture | PCI |
Connectors | SC |
Wavelength | FX = (1,300nm) |
Distance | up to 2,000 meters |
Wiring | |
Dimensions (LxW) | 6 x 2.5 in/15 x 6.4 cm |
Command usage optimization for advanced PCI commands (MWI and memory reads) Software controlled global reset bit (resets everything except PCI configuration registers)
Power and Environmental Specifications |
|
Operating |
|
Temperature | 32° to 131°F/0° to 55°C |
Humidity | 10% to 90% |
| |
Temperature | |
Humidity | 5% to 95% |
Power requirement | 1025 mA @ 5V max |
Emissions standards | FCC Class B |
Safety compliance | CE Mark |