The Com-Pak Plus Manual Reset
replacement instructions
MODELS
The | The |
C202, C152, C122, C102, C072, | CT402, CT302, CT408, |
C151, C101, C051, C208 |
|
Note:
Now is the perfect opportunity to clean your heater. See original product Owner’s Guide or go to www.cadetco.com and find detailed cleaning instructions under Other Links for the
TOOLS REQUIRED: | • Small Flathead Screwdriver | • Phillips Screwdriver | • Wire Cutter | • Cable or Wire Ties |
| • Wire Connectors | • Wire Stripper | • Crimping Tool | • Needle Nose Pliers |
|
|
|
|
|
IMPORTANT INSTRUCTIONS
WARNING
Turn the electrical power off at the electrical panel board (circuit breaker or fuse box) and lock or tag the panel board door to prevent someone from turning on power while you are working on the heater. Failure to do so could result in serious electrical shock, burns, or possible death.
IF YOU ARE UNCOMFORTABLE WORKING WITH ELECTRICAL APPLIANCES, UNABLE TO FOLLOW THESE GUIDELINES,
OR DO NOT HAVE THE NECESSARY EQUIPMENT, CONSULT A LICENSED ELECTRICIAN.
1. It is important that you verify power has been turned off and no power is going to the heater before proceeding. Circuit breakers are often not marked correctly and turning the wrong breaker off could mean electricity is flowing to the heater, even if the heater does not appear to be working.
2.Once you verify the power has been turned off correctly, proceed to the next step.
3.Please see your product Owner’s Guide for additional installation, operation and maintenance instructions for both reset and heater. Owner’s Guides may be downloaded at www.cadetco.com.
SAVE THESE INSTRUCTIONS
www.cadetco.com Tel: | 1 |
