Cal Spas A969L, A857B, A844L Testing the RCD Breaker, Spa Model, GFCI Required, Wires Required

	Spa Model	GFCI Required	Wires Required
	All 230V spas (except	One 32 amp RCD	Four #10 AWG
	6205 control boxes	or two 16 amp	copper wires
Spas	requiring high amperage	RCDs
	- see below)
	Spas with the 6300	One 32 amp RCD	Four #10 AWG
Portable
	control box (when high	or two 16 amp	copper wires
	amperage is selected on	RCDs
	circuit board)
	SEE CONFIGURATION
	INSTRUCTIONS ON
	NEXT PAGE.
Spas	Ultimate Fitness spas	One 32 amp RCD	Four #10 AWG
	with one 5.5 kW heater	or two 16 amp	copper wires
		RCDs
Fitness
		Service 1: One 32	Service 1: Four #10
		amp RCD or two 16	AWG copper wires
	Ultimate Fitness spas	amp RCDs
Ultimate
	with two 5.5 kW heaters	Service 2: One 32	Service 2: Three #10
		amp RCD or two 16	AWG copper wires
		amp RCDs
	Designer in-ground spas	One 32 amp RCD	Four #10 AWG
Spas	with one 3 kW heater	or two 16 amp	copper wires
		RCDs
		Service 1: One 32	Service 1: Four #10
In-Ground
	Designer in-ground spa	amp RCD or two 16	AWG copper wires
		amp RCDs
	with one 3 kW heater
		Service 2: One 32	Service 2: Three #10
	and one 5.5 kW heater
		amp RCD or two 16	AWG copper wires
		amp RCDs

Testing the RCD Breaker

Test the RCD breaker prior to first use and periodically when the spa is powered. To test the RCD breaker follow these instructions (spa should be operating):

1.Press the TEST button on the RCD. The RCD will trip and the spa will shut off.

2.Reset the RCD breaker by switching the breaker to the full OFF position, wait a moment, then turn the breaker back on. The spa should have power again.

14